Warranty & Support Grandio Greenhouse

For warranty coverage, terms, and claim information for this product, please contact our team.

Grandio Element Moisture Control Kit

The Grandio Element Moisture Control Kit protects the open channels, or flutes, in your greenhouse’s twin-wall polycarbonate panels. Left exposed, these channels can collect insects, dirt, and moisture. Over time, buildup inside the panels can be difficult to clean and reduce the light that reaches your plants.

The kit combines anti-dust tape with waterproof, all-weather silicone caulk. Solid tape closes the upper panel edge, while vented tape protects the lower edge and lets moisture inside the flutes evaporate. Silicone caulk seals joints where the panels meet the aluminum frame. Choose Element 6x4, Element 6x8, or Element 6x12 to match your greenhouse footprint.

Key Features

  • Solid tape for the upper edge: Covers the open flutes at the top of the panel to help keep out dust and insects.
  • Vented tape with 45-micron filters: Helps block insects, dirt, and mold spores at the lower edge while allowing trapped moisture to escape as vapor. Some moisture inside the panels is normal as humidity changes.
  • Fungicidal tape coating: Helps inhibit mold and algae growth on the tape surface.
  • Waterproof silicone seal: All-weather silicone caulk helps keep water from seeping into the joints between the panels and aluminum frame and gives the edges a clean finish.
  • Footprint-specific packages: Each option is sized for the panel coverage needed by its corresponding Grandio Element greenhouse.

Specifications

  • Compatible glazing: Grandio Element twin-wall polycarbonate panels
  • Vented tape filter size: 45 microns
  • Upper panel edge: Solid anti-dust tape
  • Lower panel edge: Vented anti-dust tape
  • Frame sealant: Waterproof, all-weather silicone caulk

Who It’s For

For Grandio Element owners who want to protect their panel channels from insects, debris, and moisture buildup while preserving panel clarity and light transmission.

Size Guide

  • Element 6x4 — Sized for the panels in a Grandio Element 6x4 greenhouse.

  • Element 6x8 — Sized for the panels in a Grandio Element 6x8 greenhouse.

  • Element 6x12 — Sized for the panels in a Grandio Element 6x12 greenhouse.

Compatibility

Designed specifically for Grandio Element greenhouses with twin-wall polycarbonate panels. Select the kit that matches your greenhouse footprint.

Included

  • 1 solid anti-dust tape

  • 1 vented anti-dust tape with 45-micron filters

  • Waterproof, all-weather silicone caulk

How to Use

  1. Measure and cut the tape. Measure the panel edge and cut the tape with about ½ inch of extra material at each end so it can wrap around the sides.

  2. Apply the tape to the panel edges. Peel off the backing. Place solid tape across the top edge and vented tape across the bottom edge. Center the vent holes over the open channels at the bottom.

  3. Smooth the tape and wrap the ends. Press down at the center first, then work outward to remove wrinkles and air bubbles. Press firmly along the entire edge. Fold the extra ½ inch around each side and flatten the ends.

  4. Prepare to caulk after assembly. Once the greenhouse is fully assembled and squared, load the silicone tube into a caulk gun. Cut the tube tip at an angle with sharp scissors to produce a bead about ⅛ inch wide. Follow the safety precautions on the silicone package.

  5. Seal the exterior frame joints. Start at a corner and keep the tip inside the aluminum channel. Apply a continuous bead along the bottom and both sides of each panel, using steady pressure and an even speed. Leave the upper panel edge clear where it meets the roof, and seal gaps where aluminum frame pieces join. Stop and restart the bead at corners.

  6. Finish the seal and allow it to cure. While the caulk is wet, wipe along the bead with a clean, dry cloth to press it into the joint and remove smudges. Check for gaps and fill them. Follow the package’s cure time before exposing the greenhouse to rain.

Product Support